Study of Abutment Pressure Zone Formation in the System of "Paired Drifts"


https://doi.org/10.17073/2500-0632-2020-1-49-55

Full Text:


Abstract

The paper presents comprehensive studies of abutment pressure formation zones in the geotechnical system of "paired drifts", including numerical simulation based on the finite element method. For the simulation, the Mohr - Coulomb elastic-plastic model was used, as well as physico-mechanical properties of coal and host rocks. The simulation was carried out for specific mining and geological conditions of k2 anthracite seam occurrence. In a software module, several stages were simulated, allowing to determine magnitude of stresses and displacements of the roof in stopes at various stages of abutment pressure formation in front of the advancing stoping face. As a result of the simulation, the values of the stresses and displacements of the roof in the rock mass around the stopes at various stages of the development of the abutment pressure formation zones were obtained, enabling using the experimental design method to optimize the parameters of adjustable pillar (as support structure). These studies are aimed at improving efficiency of stope protection by optimizing the parameters of protective support structures (adjustable pillars) to increase productivity of the stoping face during excavation of flat-lying anthracite seams, including rockburst-dangerous ones.


About the Authors

N. V. Titov
Mining Institute, Kola Scientific Center of Russian Academy of Sciences
Russian Federation

Apatity.



S. I. Ivanov
Mining Institute, Kola Scientific Center of Russian Academy of Sciences
Russian Federation

Apatity.



References

1. Bazhin N. P., Veskov M. I., Komissarov M. A. Location, protection and maintenance of development drifts in deep mines. Proceedings of VNIMI. The study of rock pressure manifestations at deep levels. Leningrad; 1971. P. 150–165. (In Russ.).

2. Bauer M. A., Dmitrienko V. A. Analysis of stress-strain state of monolithic concrete lining of non-circular shape underground structures. Don Engineering Bulletin. 2017;47(4(47)):199. Available from: http://www.ivdon.ru/ru/magazine/archive/n4y2016/3916. (In Russ.).

3. Grigoriev V. L. Protection and maintenance of development drifts and stopes subject to stoping influ-ence. Underground coal mining. 1981;(7):20–22. (In Russ.).

4. Ivanov S. I., Titov N. V., Tkachev V. A., Privalov A. A. Mine working protection using adjustible pil-lars. Mining Informational and Analytical Bulletin. 2017;(8):159–166. DOI: 10.25018/0236-1493-2017-8-0-161-166. (In Russ.).

5. Ivanov S. I., Titov N. V., Tkachev V. A., Privalov A. A. Method of longwall mining of medium and low thickness seams along the strike with abandonment of rock in mine. Mining Informational and Analytical Bulle-tin. 2017;(8):174–178. (In Russ.). DOI: 10.25018/0236-1493-2017-8-0-174-178.

6. Medvedchuk N.D. Effect of stoping face advance rate on rock pressure manifestation when extracting flat-lying seams. Coal of Ukraine. 1967;(4). (In Russ.).

7. Recommendations for safe mining of coal seams prone to dynamic phenomena. Available from: http://www.consultant.ru/document/cons_doc_LAW_227032/ (in Russ.).

8. Guidelines for rational location, protection, and maintenance of mine workings at coal mines of the USSR. 4th Ed., add. Leningrad: VNIMI Publ.; 1986. 222 p. (in Russ.).

9. Badalyan G. G., Dmitrienko V. A., Skomorokhov A. A. Resource-saving Technology of Building of Vertical Mine Working in Soil Original Research Article. Procedia Engineering. In: 2nd International Conference on Industrial Engineering (ICIE-2016). 2016;150:2293-2301. Available from: http://www.journals.elsevier.com/procedia-engineering.

10. Bauer M. A., Dmitrienko V. A., Kapustin A. I. Assessment of Deformations of Earth`s Surface at Mine Construction on Sub-Soil Original Research Article. Procedia Engineering. In: 2nd International Conference on Industrial Engineering (ICIE-2016). 2016;150:2278-2286. Available from: http://www.journals.elsevier.com/procedia-engineering.

11. Bolesta M., Menze G. Verfestigungsinjektion auf dem Bergwerk Ost mit einem hochfesten mineralis-chen Bindemittel. Gluckauf. 2003;(1):56–59.

12. Drzewiecki J. Neue Verfahren zur Bekämpfung der Gebirgsschlaggefahr. Gluckauf. 2002;(3):18–22.

13. Langhanki B. Planungskonzeption zur Doppelnutzung einer Rechteckankerstrecke. Gluckauf. 2002;(1):11.

14. Matusche T., Stratmann T. AVSA Parallelisiertes Ankern und Schneiden in Bogenstrecken. Gluckauf. 2002;(4):7–14.

15. Padera Z. Investigation of the influence of the bottom face movement speed on the manifestation of rock pressure during the development of a coal seam on models of equivalent materials. Gluckauf. 1969;(9).

16. Stive Fiscor. Total Number of Longwall Faces Drops Below 50. Coal Age. 2009;(2):24–32.

17. Syd S. Peng. Longwall Mining. West Virginia University; 2006. 621 p.

18. Syd S. Peng. Coal Mine Ground Control. West Virginia University; 2008. 750 p.

19. Tönjes B., Voß H.-W., Mehlmann W. Kombiausbaustrecke auf dem Bergwerk Ewald/Hugo. Gluckauf. 2001;(1):28.

20. Varvo M. Influence of the extraction rate on the manifestation of deformations and pressure in the bot-tom-hole space. Gluckauf. 1969;(15).


Supplementary files

For citation: Titov N.V., Ivanov S.I. Study of Abutment Pressure Zone Formation in the System of "Paired Drifts". Gornye nauki i tekhnologii = Mining Science and Technology (Russia). 2020;5(1):49-55. https://doi.org/10.17073/2500-0632-2020-1-49-55

Views: 156

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2500-0632 (Online)