Effect of Uncertainty in Basing Hydraulic Prop Rod on Dimensional Wear of its Basic Surfaces


https://doi.org/10.17073/2500-0632-2020-3-201-207

Full Text:


Abstract

Hydraulic power cylinders are the main bearing elements of powered supports at mining enterprises, ensuring reliable fixation of the roof in the required working position, as well as providing advancement of the support in the face. Thus, hydraulic power cylinders ensure stoping safety, so strict requirements are im-posed on them both in terms of workmanship and operational reliability. To ensure reliability and efficiency of powered support operation in faces, it is necessary to ensure stable service life of their hydraulic props, which mainly depends on the quality of manufacturing of mating surfaces and the accuracy of assembling functional joints. The required accuracy of hydraulic prop joints is achieved by selective assembly, which allows ensuring the specified technical requirements and service life of the joints. At the same time, along with the issues of ensuring the accuracy of assembling the props to provide proper safety of the face operation, it is extremely important to identify and analyze the causes of dimensional wear of critical parts of the joints, leading to decreasing service life of the hydraulic props in the course of exploitation. In the paper, using the methods of the analytical theory of bases, the reasons for formation of positional variations of the parts of the powered support hydraulic prop joints in the course of assembling and operation of the unit are identified and described. It was found that arising mismatches and formation of local stress zones on the cylinders, pistons and rods, characterized by intense wear, occurs due to the uncertainty of basing (positioning) of rod and piston in hydraulic cylinder. The dependencies allowing calculating deviation of the rod axis from the required position, taking into account the initial clearance gap in the joints and the adopted design parameters of the hydraulic cylinder, have been obtained.


About the Author

Van Tuan Ngo
Vietnamese State Technical University named after Le Kui Dong
Viet Nam
Hanoi


References

1. GOST 15852–82. Powered hydraulic supports for longwalls: basic parameters and dimensions. Mechanized hydraulic supports for longwalls. Мoscow: Standarty Publ.; 1985. 5 p. (In Russ.)

2. GOST 18585–82. Powered hydraulic supports for longwalls: general technical requirements. Мoscow: Standarty Publ.; 1985. 4 p. (In Russ.)

3. GOST 12.44.245–83. Powered supports. Props and jacks. Strength calculation. Method of verification calculation for static strength and stability. Мoscow: Giprouglemash; 1984. 76 p. (In Russ.)

4. Demkin N. B., Ryzhov E. V. Surface quality and contact of machine parts. Мoscow: Mashinostroenie Publ., 1981. 24 p. (In Russ.)

5. Shubina N. B., Gryaznov B. P., Shakhtin I. M., Morozov V. I., Berezkin V. G. Prevention of face equipment parts breakdown. Мoscow: Nedra Publ.; 1985. 215 p. (In Russ.)

6. Sklyarov N.S. Assessment and improvement of the quality of overhauled powered roof supports of longwall sets of equipment. Ph.D. thesis in Engineering Science. Мoscow: MGI; 1982. 261 p. (In Russ.)

7. Nabatnikov Yu.F. Providing preset service life of joints of machine parts. Assembly in mechanical engineering and instrument-making. 2011;(4):3-8. (In Russ.)

8. Nabatnikov Yu.F. Increasing service life of machine parts. In: Seminar "Modern technologies in mining engineering". Miner’s Week 2011: Proceedings. Мoscow: MGGU Publishing House; 2011. P. 110–117. (In Russ.)

9. Wiederhold M. Clustering of Similar Features for the Application of Statistical Process Control in Small Batch and Job Production. Ergebnisse aus der Produktionstechnik 20/2017. Eds.: Brecher, C.; Klocke, F.; Schmitt, R.; Schuh, G. Aachen. Apprimus Verlag; 2017.

10. Wenking M, Benninghaus C, Groggert S. Die Zukunft von Manufacturing Data Analytics: Implikationen für eine erfolgreiche Datennutzung im produzierenden Umfeld. Industrie 40 Management. 2017;33(4):33-37.

11. Baranchukova I. M., Gusev A. A., Kramorenko Yu. B. et al. Designing of Automated Engineering Techniques: College Textbook. Мoscow: Vysshaya Shkola Publ.; 1999. 415 p. (In Russ.)

12. Timiryazev V. A., Novikov V. Yu., Skhirtladze A. G. Fundamentals of mechanical-engineering technology. College Textbook. Мoscow: MSTU Stankin" Publ.; 2019. 393 p. (In Russ.)

13. Nabatnikova T. Yu., Nabatnikov Yu. F. Simulation of plunger tilt distortion in hydraulic prop. Mining Information and Analytical Bulletin. 2001;(12):182–183. (In Russ.)

14. Belyankina O. V. Influence of rod distortion in cylinder on stress condition of powered support hydraulic prop. Obrazovanie, nauka, proizvodstvo i upravlenie. In: Education, science, production and management. Proceedings of Scientific-Practical conference. V. 5. Stary Oskol: STI NITU MISiS; 2008. P. 20–27. (In Russ.)

15. Elser H., Heutmann T., Lindemann M., Schmitt R. Hellsehen in vier Schritten. Data Analytics für das digitale Qualitätsmanagement. Qualität und Zuverlässigkeit. 2018;63(2):31–33.

16. Schmitt R., Göppert A., Hüttemann G., Lettmann P., Rook-Weiler K., Schönstein D., Schreiber A., Serbest E., Steffens M., Tomys-Brummerloh A. Frei verkettete wandlungsfähige Montage. Internet of production für agile Unternehmen. AWK Aachener Werkzeugmaschinen Kolloquium 18. bis 19. Mai 2017. Hrsg.: Schuh, G.; Brecher, C.; Klocke, F.; Schmitt, R. Apprimus Verlag Aachen; 2017. P. 339–368.


Supplementary files

For citation: Ngo V.T. Effect of Uncertainty in Basing Hydraulic Prop Rod on Dimensional Wear of its Basic Surfaces. Gornye nauki i tekhnologii = Mining Science and Technology (Russia). 2020;5(3):201-207. https://doi.org/10.17073/2500-0632-2020-3-201-207

Views: 513

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2500-0632 (Online)